Erorr Code
E9 The connected digital camera / video camera does not support Camera
Direct Printing
E14 The Ink cartridges whose destination are wrong
E15 Ink cartridge is not installed E16 - Ink remaining is unknown
E16 -E19 Failed to scan head alignment sheet
E22 Carriage error
E23 Paper feed error
E24 Purge unit error
E25 ASF(cam) sensor error
E26 Internal temperature rise error
E27 Waste ink absorber full or platen waste ink absorber full
E28 Ink cartridge temperature rise error -
E29 EEPROM error
E33 Paper feed position error
E35 15 USB Host VBUD overcurrent error - USB
E37 17 Abnormal motor driver error
E40 20 Other hardware error
E42 22 Scanner error
Jumat, 15 Mei 2009
ERORR CODE CANON MP 150 / 160
Jumat, 08 Mei 2009
Info Adjsutmets Epson Seri T & TX
adjustment Epson T11 / T20/ T10 / TX 101 / T300/ All new ,harus berbayar ,belum keluar yang gratisannya......
coba aja email ke sini: adjustmentepson@gmail.com
MP750 / MP780 reset instructions..
MP750 / MP780 reset instructions..
These instructions should allow you to reset the ink waste counter on your Canon MP750 or MP780 but they should ONLY be used once you’ve actually replaced the waste ink pads or handled some form of waste ink collection that doesn’t cause the pads to overflow. If you ignore this, you’ll end up damaging your printer with ink overflowing into the system!!
Hint:
- To select something… Use the ‘-’ and ‘+’ buttons and then the “OK” button.
- To go back… Use the “Stop/Reset” button
- To reset… Use the “On/Off” button (only after you’ve gone back as far as possible it seems)
1. Service menu: Menu -> Scan -> Copy -> Scan (one at a time in sequence)
2. Select “TEST MODE”
3. Select “[8] ETC..”
4. Select “[4] EEPROM CLEAR”
5. Select “[1] INK COUNT”
6. Press the [OK] button.
7. Press the [Stop/Reset] button (returns you to the TEST MOD sub-menu))
8. press the [ON/OFF] button (which resets the printer)
MP750 and MP780
MP750 and MP780
Service Menu
Press MENU-SCAN-COPY-SCAN
Cycle through options to #7 PRINTER, Press OK
Cycle through options to #5 (Ink Abs Cap) Press OK
It should say “SUCTION” on the screen. Enter “0″ (Zero). Now either press OK
Turn printer off and then back on.
Resetting Printer Canon MP140, MP160, MP180, MP210, MP220, MP460, MP470, MP500, MP510, MP530, MP600, MP610, MP800, MP820, MP810, MP830, MP960, MP970 p
* Turn off the canon printer
* Hold the Resume Button (red circle in the triangle), add a printer (click “Power”) an indicator light green.
*Hold the Power Button, release the Resume Button.
* Not releasing the Power Button, double
click “Resume” and release Both Buttons.
* Click “Resume” for Four times
* Once you click “Power”, to confirm the selected action (reset counter absorber). To disable the printer “Power” button to click again.
Kamis, 07 Mei 2009
Cara resetting waste ink Canon MP 360 / 390
Resetting Waste Ink Tank Full Canon MP390 and Canon MP360, With this procedure you don’t need replace waste ink pad/tank of the printer and don’t need to open the printer. Just Follow this step to reset waste ink tank full:
1. Printer on, press Additional Functions, Scan, Copy, Scan
Now you should be in service mode from there for waste ink tank reset
2. Select Test mode which is like the last avalabe selection
3. Select #8 Printer Test, it will do something here like cleaning or something then it will come up with some other option this is where it gets a bit confusing cause now all it says is like 8-2 or 8-3 push the + or - button until it says 8-3 then hit the select button
The menu will now say EEPROM Clear
Select Ink count which is option (0) and press set
Then press Stop/Reset Followed by the power button and then wait for it to restart.
How to reset waste tank full error in Canon Smartbase MP730 procedures:
1. Hit the “menu”: Key
2. Hit “Copy” Key
3. Hit “#” Key
4. Scroll thru the menu headings until you come to “Test Mode” - 12th heading
5. Hit the “3″ button- this will bring up Eprom Clear
6. Hit “0″ button
7. Hit the “Stop” button
semoga bermanfaat
Minggu, 03 Mei 2009
Langganan:
Postingan (Atom)